FPR500A Series Servo Drive 3 Phase VFD Converter 18.5KW For Injection Machine Dedicated
Premium Products
FPR500A Series Servo Drive 3 Phase VFD Converter 18.5KW For Injection Machine Dedicated
1
2
3
Brand Name :CHIFON
Model Number :FPR500A-18.5G/22P-T4
Certification :CE,ISO,SGS,EAC
Place of Origin :CHINA
MOQ :1pcs
Payment Terms :L/C, T/T, Paypal
Supply Ability :10000pcs per month
Delivery Time :sample order 2 working days, bulk order 7-10 working days
Packaging Details :Cartons 39.5*29.5*28.5cm
Application :Injection Machine
Model :FPR500A-18.5G/22P-T4
Control mode :V/F vector control
Motor Power :18.5kw/25HP
Motor Phase :Three phase
Input Voltage :380-460v
Output Voltage :380-460v
Rated Output Current :37A/45A
Communication :MODBUS/ RS485
Speed Accuracy :±0.5% (V/f Control)
Warranty time :18months
Function :Energy saving, Speed controlling
After-sale service :Trouble shooting by photo and videos
Contact Now
FPR500A Series Servo Drive For Injection Machine Dedicated 18.5KW
How to specify an appropriate VFD
Motor Information
The following motor information will be needed to select the proper variable frequency drive:
Full Load Amp Rating: Using a motor's horsepower is an inaccurate way to size variable frequency drives.
Voltage Rating
Speed Range: Generally speaking, a motor should not be run at any less than 20% its specified maximum speed allowed. If it is run at a speed less than this without auxiliary motor cooling, the motor will overheat. Auxiliary motor cooling should be used if the motor must be operated at slow speeds.
Multiple Motors: To size a variable frequency drive that will control more than one motor, add together the full-load amp ratings of each of the motors. All motors controlled by a single drive must have an equal voltage rating.
Supply Power
If continuous operation is a must, then the following should be specified:
+/- 10% voltage fluctuation
+/- 3% frequency variation
Voltage sag ride-through for the following: 0% voltage for 1 cycle 60% voltage for 10 cycles 87% voltage continuous
If you need to supply a 3-phase drive with single-phase power, then the drive should be derated by 25% to 50% of its current-handling ability, which may require you to specify a larger-sized drive.
Control Methods for Variable Frequency Drives
With 2-wire control, only one switch is used to run the variable frequency drive. An open switch stops the drive, and a closed switch starts the drive. Two-wire control is predominately used in HVAC applications since it is able to maintain the RUN command to the drive during a loss of power, which enables Variable Frequency Drives to automatically restart when power is restored. Plus, 2-wire control allows drives that have "power loss ride-through" to operate during a power drop that is 2 seconds or less in duration.
With 3-wire control, two switches are used to run the drive. One switch is needed to stop, and another to start the variable frequency drive. This allows an auxiliary contact from the start to "seal in" the RUN command, just like your more conventional motor starters.
Speed Reference Alternatives
Speed Potentiometer: This allows the operator to set motor speed with the pot.
Digital Programming / Display Unit: This allows the operator to program and troubleshoot the drive-by inputting values through a keypad with an LED or LCD display unit. Drive operation can also be monitored through this display.
Analog Signal Follower: 4-20mA or 0-10VDC; must provide variable frequency drives with an isolated input; must use a twisted/shielded pair and keep the wire away from 3-phase AC.
Selector switch speed selection: This allows the operator to select from several preset speeds. Can also be used if the speed is being set via a PLC, and analog output is not available.
Serial Communications: Allow variable frequency drives to communicate on a network, such as MODBUS, PROFIBUS, DEVICENET, or METASYS, enabling drive operation to be coordinated and monitored from a PC.
Efficiency and Power Factor
A drive should have an efficiency rating of 95% or better at full load. Variable frequency drives should also offer a true system power factor of 95% or better across the operational speed range, to avoid penalties from the power utility, save on energy bills, and to protect you equipment (especially motors).
Protection and Power Quality
Motor overload for the instantaneous trip and motor over current.
Additional Protection: Over voltage, under-voltage, over-temperature, ground fault, control, or microprocessor fault. These protective circuits should provide an orderly shutdown of the VFD, provide an indication of the fault condition, and require a manual reset (except under voltage) before restart. Under voltage from a power, the loss shall be set to automatically restart after return to normal. The history of the previous three faults shall remain in memory for future review.
If a built-up system is required: there should also be externally-operated short circuit protection, door-interlocked fused disconnect, circuit breaker or motor circuit protector (MCP) rated at a minimum of 65,000 AIC, and a door-interlocked handle capable of being locked.
Harmonics
The drive/system should be compliant with IEEE 519-1992. The IEEE 519-1992 Table of Current Distortion Limits for general distribution systems (120V through 69,000V) is given below:
Current Distortion Limits for General Distribution Systems
(120V through 69,000V)
Maximum Harmonic Current Distortion in Percent of IL
Product advantages
FPR500A Series Injection Molding Machine Servo Drive can change output voltage according to load change, optimize motor efficiency continuously, make output power and pressure and flow synchronously track control, eliminate the original systemHigh pressure overflow energy loss. It can greatly reduce the vibration of mold closing and opening, stabilize the production process, and improve the product quality and production efficiency.
High position repetition precision: fast response speed guarantees the mold opening and closing precision, and the glue injection end position precision can reach 0.1 mm;
High precision of pressure control: The high precision and high response PID algorithm makes the system pressure very stable, the pressure fluctuation is less than 0.5bar, which improves the quality of feed products.
Energy-saving: Compared with the traditional quantitative pump and variable pump system, the servo pump system combines the fast step-less speed regulation characteristics of the servo motor and the hydraulic oil pump self-regulating oil pressure characteristics, the energy-saving rate can be as high as 60%.
VFD application range: Fans, Blowers, Turbines, Blast furnace, Water Pumps, Oil pumps, Plastic extruders, Granulating machine, Industrial production lines, Industrial washing machines, CNC machine, Spinning frame, Roving frame, Dyeing and printing machinery, Escalator, Medium requirement applications, Crane application, Metal cutting machine...
